Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-317
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show ssm provisioning
show ssm provisioning
To display the attributes of the Storage Services Module (SSM) installed, use the show ssm provisioning
command.
show ssm provisioning
Syntax Description This command has no other arguments or keywords.
Command Default None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example provisions the SSM installed in the switch.
switch# show ssm provisioning
Module Ports Application Provisioning Status
-----------------------------------------------------------
4 1-32 scsi-flow success
Table 22-10 describes the significant fields shown in the show ssm provisioning command output.
Related Commands
Release Modification
2.0(2) This command was introduced.
2.1(1a) Added Provisioning Status column to the display.
Table 22-10 show ssm provisioning Field Descriptions
Field Description
Module Slot where SSM is installed.
Ports Ports available on the SSM.
Application Feature configured on the SSM.
Provisioning Status Displays the status of the SSM attributes.
Command Description
ssm enable feature Enables the SCSI flow feature on the SSM.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English