Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
4-34
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear crypto sa domain ipsec
clear crypto sa domain ipsec
To clear the security associations for IPsec, use the clear crypto sa domain ipsec command.
clear crypto sa domain ipsec interface gigabitethernet slot/port {inbound | outbound}
sa sa-index
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines To clear security associations, IPsec must be enabled using the crypto ipsec enable command.
Examples The following example shows how to clear a security association for an interface.
switch# clear crypto sa domain ipsec interface gigabitethernet 1/2 inbound sa 1
Related Commands
interface gigabitethernet
slot/port
Specifies the Gigabit Ethernet interface.
inbound Specifies clearing inbound associations.
outbound Specifies clearing output associations.
sa sa-index Specifies the security association index. The range is 1 to 2147483647.
Release Modification
2.0(x) This command was introduced.
Command Description
show crypto sad
domain ipsec
Displays IPsec security association database information.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English