Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
4-29
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear cdp
clear cdp
Use the clear cdp command to delete global or interface-specific CDP configurations.
clear cdp {counters | table} [interface {gigabitethernet slot/port | mgmt 0}]
Syntax Description
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines You can issue this command for a specified interface or for all interfaces (management and Gigabit
Ethernet interfaces)
Examples The following example clears CDP traffic counters for all interfaces.
switch# clear cdp counters
switch#
The following example clears CDP entries for the specified Gigabit Ethernet interface.
switch# clear cdp table interface gigabitethernet 4/1
switch#
Related Commands
counters Enables CDP on globally or on a per-interfaces basis.
table Specifies the EXEC command to be executed.
interface Displays CDP parameters for an interface.
gigabitethernet Specifies the Gigabit Ethernet interface.
slot/port Specifies the slot number and port number separated by a slash (/).
mgmt 0 Specifies the Ethernet management interface.
Release Modification
1.1(1) This command was introduced.
Command Description
cdp Configures global or interface-specific CDP settings and parameters.
show cdp Displays configured CDP settings and parameters.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English