See also
Variable parameters
(Page 69)
5.14 Details on the position of the short text, position of the input/output
field
Overview
The short text and graphic text, as well as the input/output field and unit text, are each treated
like a unit, i.e., position settings for short text apply to the graphic text and settings for the input/
output field and to unit text.
Programming
The configured position entry overwrites the default value, i.e., only one value can be changed.
If no position settings have been configured for subsequent screen form elements, then the
position settings for the preceding screen form element are applied.
If no positions have been specified for any dialog elements, the default setting is applied. By
default, the column width for the short text and input/output field is calculated for each line
based on the number of columns and maximum line width, i.e.,
column width = maximum line width/number of columns.
The width of the graphics and unit text is predefined and optimized to suit the requirements of
programming support. If graphics or unit text has been configured, the width of the short text
or I/O field is reduced accordingly.
The order of short text and I/O field can be reversed by position settings.
See also
Variable parameters (Page 69)
5.15 Use of strings
Strings
Strings can be used as part of the configuration. These allow text to be displayed dynamically
or different texts to be chained for the purpose of code generation.
Rules
The following rules must be observed with regard to string variables:
● Logic operations are processed from left to right.
● Nested expressions are solved from the inside outwards.
Variables
5.15 Use of strings
SINUMERIK Integrate Run MyScreens
80 Programming Manual, 10/2015, 6FC5397-3DP40-5BA3
To Next Page
Loading...
Need help?
General
