Result
When the changes have been accepted, a configuration file with the "slsoftkeyaccess.xml"
name is created and
is saved in the file system under the following path: ../user/sinumerik/hmi/
cfg. Files can also be saved in the /oem path, which are evaluated when the system boots.
The following priority applies: oem < user.
Note
Editing the file "slsoftkeyaccess.xml"
In order to avoid
errors in the xml syntax and for the softkey identifier the "slsoftkeyaccess.xml"
file may only be edited via the operating software as described above, and not directly in the
file system under "System data". It is possible that the complete file or individual entries for
softkeys can no longer be interpreted.
1.2 Set date/time
You have the possibility of manually setting the date and time for the SINUMERIK control. In
so doing, you can select from various display formats.
Formats of the date display
Formats Example
d.M.yy 3.1.09
dd.MM.yy 03.01.09
dd.MM.yyyy 03.01.2009
d/M/yy 3/01/09
dd/MM/yy 03/01/09
dd/MM/yyyy 03/01/2009
M/d/yy 1/3/09
MM/dd/yy 01/03/09
MM/dd/yyyy 01/03/2009
yyyy/MM/dd 2009/01/03
The following applies:
Date Description of the entry
d Single or double digit day of the month (1 - 31).
dd Double digit day of the month, with leading zero (01 - 31).
M Single or double digit month of the year (1 - 12).
MM Double digit month of the year, with leading zero (01 - 12).
yy Double digit year (00 - 99).
yyyy Four-digit year (e.g. 2009).
General settings
1.2 Set date/time
SINUMERIK Operate
16 Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
To Next Page
Loading...
Need help?
General
