10.5 Drive system
10.5.1
Displaying drive states
Status display
The "Drive System Diagnostics" window displays the status information about the drive units
and the associated drive objects. The status symbols have the following meaning:
Display icon
Meaning
Green The drive object is in (cyclic) operation, without any detected
problems.
Yellow The drive object has detected a less serious problem, i.e. a
warning is pending, for example, or enables are missing.
Red This drive object has detected a serious problem, for example,
an alarm is pending.
Gray The drive status could not be determined for this drive object.
# Special charac‐
ters
Error when reading the data.
Procedure
1. Select the "Diagnostics" operating area.
2. Press the menu forward key and the "Drive system" softkey.
3. The "Drive System Diagnostics" window opens.
The name of the selected drive object is displayed in the window title.
Press the "Drive object +" or "Drive object -" softkey.
The next (+) or previous (-) drive object is selected.
- OR -
Press the "Select drive unit" softkey.
The "Select Drive Unit" window opens.
4. Select the desired drive unit via the drop-down list box and press "OK" to
confirm the selection.
See also
Displaying details of the drive objects (Page 364)
Service and diagnostics
10.5 Drive system
SINUMERIK Operate
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3 363
To Next Page
Loading...
Need help?
General
