Machine and setting data
2
2.1 User views
Usage
In
the "User Views"
window you can create and adapt all machine data relevant to a particular
functionality. Machine data is individually collated to simplify the user's task.
You can include additional comments when creating and/or editing user views.
Display in the the "Parameter" operating area
Proceed as follows to show user views also in the "Parameters" operating area:
1. Select the "Start-up" operating area.
2. Press the "Machine data" softkey.
3. Press the "User views" softkey.
4. Press the "Manage view” softkey.
5. Press the "New view" softkey.
6. Activate the "Use display also under parameters / setting data" checkbox if you also wish
to display the new user view in the "Parameters" → "Setting data" → "Data lists" operating
area.
7. Enter a name for the user view.
8. Confirm with "OK".
9. Insert the machine data that is to be displayed in the "Parameters" operating area.
SINUMERIK Operate
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3 23
To Next Page
Loading...
Need help?
General
