8.4 Display on the user interface
Dialogs on the user interface
The following dialogs are available for Easy Extend:
●
The control offers a
configurable dialog, in which the available devices are shown.
●
If
first commissioning has not taken place yet, the control opens the commissioning dialog.
If a commissioning procedure is programmed for the unit (XML statement: "START_UP"), and
the device has not been commissioned yet, the control starts the commissioning procedure.
This involves a complete data backup before the commissioning archives saved in the script
file are imported. Standard or data class archives are permitted as archive types: *.arc and
*.ard
● In the event of an error, the commissioning engineer can decide whether to roll back the
commissioning procedure or to rectify possible errors in machine configurations manually.
● Commissioning can be aborted early with the "Cancel" function. The control then copies
the previously saved commissioning files back.
If the machine has to be switched off after successful completion of the commissioning, the
XML statement "POWER_OFF" can be used to program that a corresponding message is
output on the control.
Easy Extend
8.4 Display on the user interface
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3 243
To Next Page
Loading...
Need help?
General
