3.5.2 This is how you determine missing licenses/options
Determining the license requirement
Procedure:
1. Press the "All options" softkey to list all the options that can be selected for this control.
2. Activate or deactivate the required options in the "Set" column:
– Mark the checkbox
–
Enter the number of options
3. Press the "Missing lic./opt." softkey in order to display all options that are licensed. In the
"Set" column, you can deselect the options that you do not require.
Figure 3-7 Licensing (example)
4. Press
the
softkey
"Set
option according to license", to activate all of the options contained
in the license key. Confirm the following confirmation prompt with "OK".
5. To activate new selected options, press the "Reset (po)" softkey. A safety prompt appears.
1. Press the "OK" softkey to trigger a warm restart.
- OR -
2. Press the "Cancel" softkey to cancel the process.
Operating software settings
3.5 Checking and entering licenses
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3 49
To Next Page
Loading...
Need help?
General
