Rockwell Automation MagneMotion MagneMover LITE User Manual

Specifications and Site Requirements
Mechanical Specifications
MagneMover LITE User Manual 151
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
Figure 4-4: 1000 mm Railless RS-422 Air-cooled Motor Mechanical Drawing
NOTE: See Motors and Switches on page 206 for the electrical specifications.
See Air-cooled Motors on page 227 for the pneumatic specifications.
Only available with the Synchronization option installed.
The exclusion zones that are shown are for the MM LITE motor only. Additional
exclusion zones may be required based on the material being transported.
Ingress Protection Rating: Designed for IP65 (IEC 60529).
Vibration Rating: 5…500 Hz. @ 2 g.
Shock Rating: 15 g.
Exposed Materials
• Copper alloy, Nickel plate.
• Zinc, Nickel plate.
• Dow Corning
®
Silicone 737 and 734.
• A4 SS.
• 303 SS, Nickel plate (air ports).
• 316L SS, Passivated.
• A286 SS.
• 300 Series SS, Passivated.
• 303 SS.
• Steel, Zinc plate (air port plug).
All Dimensions in Millimeters [Inches]Weight: 6.9 kg [15.2 lb]
0
19.68 5 500.0 0
223.0 0
8.78 0
28.46 5 723.0 0 7.95 3
202.0 0
27.63 8 702.0 0
POWER CONNECTOR
CONNECTOR
SYNC CABLE CONNECTOR
CONNECTOR
(SYNC MOTOR ONLY)
COMMUNICATION CABLE
COMMUNICATION CABLE
2X M6X1.0
7mm
MOUNTING HOLE
MAX ALLOWABLE TORQUE = 5.5 Nm
43.1
1.70
3.4 0
86.3
25.984 660.00 6.299
160.00
4X
1.18
30
4X
2.95
75
CLEARANC E NEEDED FOR
CONNECTOR & WIRE BEND RADIUS
39.33
999.0
2.60±.03
66.1±0.7 5
4.06
103. 3
MMI-MML-1000M-NR-SER-SYNCAC

Rockwell Automation MagneMotion MagneMover LITE Specifications

General

Brand	Rockwell Automation
Model	MagneMotion MagneMover LITE
Category	Accessories
Language	English