Rockwell Automation MagneMotion MagneMover LITE User Manual

Maintenance
Repair
MagneMover LITE User Manual 419
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
Replace Tandem Wheeled Puck Wear Surfaces
The various wear surfaces on the tandem wheeled pucks must be replaced once they have
become worn due to extended use (typically greater than 8,000 km travel for the lateral guide
wheels and bumpers, and 16,000 km travel for the suspension wheels). This procedure pro-
vides instructions to replace worn wear surfaces on the following tandem wheeled pucks:
• 700-1740-00 – Wheeled Puck Assy, Tandem.
Required Tools and Equipment
• MMI-ML-KRW16-0 – Bearing Replacement Kit, Tandem Wheeled Cart.
• Washer, Thrust, Cust, 20 ID, 36 OD, 1.5Th (2X).
• Bearing, Flange,15 mm Flange, 8 mm ID x 5.5 Long (2X).
MAGNETIC FIELD HAZARD: Strong magnets in use.
To avoid severe injury, people with pacemakers and other
medical electronic implants must stay away from the magnet
array on the vehicles (pucks).
PINCH/CRUSH HAZARD: Strong magnets in use.
To avoid injury from strong magnetic attractive forces:
• Handle only one vehicle (puck) or magnet array at a time.
• Do not place any body parts (for example, fingers)
between a magnet array and any ferrous material or
another magnet array.
• Vehicles (pucks) and magnet arrays not being used must
be secured individually in isolated packaging.
NOTICE Strong magnets in use.
To avoid damage to watches, instruments, electronics, and
magnetic media, keep metal tools, metal objects, magnetic
media (for example, memory disks/chips, credit cards, and
tapes) and electronics away from the magnet arrays.

Rockwell Automation MagneMotion MagneMover LITE Specifications

General

Brand	Rockwell Automation
Model	MagneMotion MagneMover LITE
Category	Accessories
Language	English