Rockwell Automation MagneMotion MagneMover LITE User Manual

Maintenance
Repair
MagneMover LITE User Manual 383
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
Repair
If a component of the MagneMover LITE transport system malfunctions, see Troubleshooting
on page 371 in this manual for diagnostic procedures. If these procedures are not adequate to
determine the source of the problem, see Contact Rockwell Automation Technical Support on
page 382. Once the failed unit has been identified, a replacement unit can be ordered and
installed as directed in Installation on page 237.
NOTE: The components of the MagneMover LITE transport system are designed for easy
replacement. Motors, controllers, and other modules do not contain any user service-
able parts.
NOTICE Only a qualified service representative can service the com-
ponents of the MagneMover LITE transport system. Any
attempt to open the transport system modules by anyone
other than a qualified service representative voids the war-
ranty.
Table 7-10: MagneMover LITE Repair Procedures
Component Maintenance Action Page #
MagneMover LITE Trans-
port System
Replace RS-422 Motors 385
Program RS-422 Motors 387
Replace RS-422 Motors with Ethernet Motors 388
Replace Ethernet Motors 391
Program Ethernet Motors 393
Replace Motor Rails 394
Replace Switch Rails 396
Puck Separating Magnet Arrays 398
Replace Pucks 399
Replace Glide Puck Wear Surfaces 402
Replace Tandem Glide Puck Wear Surfaces 406
Replace Wheeled Puck Wear Surfaces, 4-Wheel Pucks 412
Replace Wheeled Puck Wear Surfaces, 2-Wheel Pucks 416
Replace Tandem Wheeled Puck Wear Surfaces 419
Power Supply Replace MM LITE Power Supply Fuses 425

Rockwell Automation MagneMotion MagneMover LITE Specifications

General

Brand	Rockwell Automation
Model	MagneMotion MagneMover LITE
Category	Accessories
Language	English