Safety Guidelines
Pneumatic Hazards
MagneMover LITE User Manual 65
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
Pneumatic Hazards
The precision locator is connected to the compressed air system in the facility, which is capa-
ble of generating hazardous energy. The proper precautions for operating and servicing pneu-
matic equipment must be observed. These precautions include following facility
lockout/tagout procedures, and any other specified action within the facility where the MM
LITE precision locator is being used.
The MagneMover LITE precision locator option is a low energy device, no additional pneu-
matic safety precautions are required.
PNEUMATIC HAZARD
All pneumatic power to the MagneMover LITE transport
system must be disconnected per the lockout/tagout proce-
dure for the facility before servicing to help prevent the risk
of mechanical movement.
Do not turn on the pneumatic system until after connecting
all other transport system components.
To Next Page
Loading...
Need help?
General
