Rockwell Automation MagneMotion MagneMover LITE User Manual

Maintenance
Troubleshooting
372 MagneMotion
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
Power-Related Troubleshooting
This section covers the determination of power-related problems within the MagneMover
LITE transport system.
Table 7-4: Power-Related Troubleshooting
Symptom Problem Description Corrective Action
Lights on power supplies do not
turn on.
No power or incorrect power
being supplied.
Verify that the cable from the
facility power is fully seated and
secured.
Verify that the facility power to
the MM LITE transport system is
the correct power rating.
MM LITE power supply main
fuses are blown.
Replace fuses and determine the
cause to minimize the chance of
recurrence.
Motors do not move the vehicles
at full speed.
Power supply is not providing full
power.
Verify that the power supply air
filter is not dirty. Clean or replace
if necessary.
Verify that power supply vents are
not obstructed (see Figure 4-40 on
page 188).
Transport system motion control
issues.
Review Motion Control Trouble-
shooting on page 377.
One or more motors do not oper-
ate.
Power or communication to the
affected motors is lost or intermit-
tent.
Verify that the cables to the
affected motors are fully seated
and secured.
Power supply is not providing full
power.
Verify that the power supply for
the affected motor is operating
properly.
Verify the output voltage from the
power supply.
Verify that the power supply
Logic and Propulsion fuses are
not blown. Replace if necessary
and determine the cause to help
prevent recurrence.

Rockwell Automation MagneMotion MagneMover LITE Specifications

General

Brand	Rockwell Automation
Model	MagneMotion MagneMover LITE
Category	Accessories
Language	English