Maintenance
Repair
386 MagneMotion
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
10. Store the motor in a secure location.
11. See Shipping on page 458 to return the motor to MagneMotion.
Install the New Motor
1. See Motor Installation on page 254 for detailed installation instructions.
2. Reference the labels that were previously placed on the cables and connect the cables
to the new motor.
3. Restore power to the section of the MM LITE transport system where the motor was
replaced.
4. Program the new motor with the current Motor ERF Image files (see Program RS-422
Motors on page 387).
5. Resume motion on the section of the MM LITE transport system where the motor was
replaced.
To Next Page
Loading...
Need help?
General
