Maintenance
Shipping
458 MagneMotion
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
Shipping
If a MagneMover LITE component must be shipped, either for return to MagneMotion or to
another location, it must be packaged properly to make sure that it arrives undamaged. The
following procedure provides the correct method for handling and packaging MM LITE com-
ponents for shipment.
Required Tools and Equipment
• Metric hex wrenches.
• English hex wrenches.
• Open-end wrench, adjustable.
• Fork truck or appropriate lift as required.
SHOCK HAZARD
Before beginning this procedure, the MagneMover LITE
transport system must be shut down following the procedure
that is provided in Shutdown on page 344.
LIFTING HAZARD
The MagneMover LITE components can weigh as much as
7.3 kg [16.1 lb].
Use proper techniques for lifting and safety toe shoes when
moving any MagneMover LITE components.
To Next Page
Loading...
Need help?
General
