Rockwell Automation MagneMotion MagneMover LITE User Manual

Maintenance
Preventive Maintenance
MagneMover LITE User Manual 357
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
Single Wheeled Pucks Procedure
The wheels on the single wheeled puck must be inspected regularly to help maintain proper
operation.
1. Remove the wheeled puck from the MagneMover LITE transport system (see Replace
Pucks on page 399).
Figure 7-4: Wheeled Puck Wear Point Inspection
2. Inspect the wheels for high rotating friction and tread/surface damage (see Figure 7-4).
• If any wheels are showing excessive accumulation of particles, clean the wheel
set, see Wheeled Puck Cleaning on page 354.
• If any wheels are showing excessive friction or tread damage, replace the
wheel set, see Replace Wheeled Puck Wear Surfaces, 4-Wheel Pucks on
page 412.
3. Replace the puck on the transport system (see Replace Pucks on page 399).
Lateral Guide
Wheels
Suspension
Wheels
Septum
Wheels

Rockwell Automation MagneMotion MagneMover LITE Specifications

General

Brand	Rockwell Automation
Model	MagneMotion MagneMover LITE
Category	Accessories
Language	English