Rockwell Automation MagneMotion MagneMover LITE User Manual

Operation
Transport System Operation
MagneMover LITE User Manual 343
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
Transport System Operation
Power-up
The MagneMover LITE transport system is started by applying power as previously specified
(see Check-out and Power-up on page 309). Once the system completes startup, the MM
LITE components are ready to operate. If the host controller is in control of the MM LITE
transport system, the transport system accepts commands from the host controller through the
network connection.
Normal Running
During normal operation, the host controller controls the MagneMover LITE transport sys-
tem. The facility must determine the exact usage of the MM LITE transport system. See the
Host Controller TCP/IP Communication Protocol User Manual, MMI-UM003, for details of
each command to use TCP/IP communication. See the Host Controller EtherNet/IP Commu-
nication Protocol User Manual, MMI-UM004, for details of each user-defined tag and the
interface to use EtherNet/IP communication.
NOTICE All network switch settings, communication connections,
and power connections must be made before power is
applied.
PINCH/CRUSH HAZARD
Moving mechanisms have no obstruction sensors.
Do not operate the MagneMover LITE components without
barriers in place or personal injury could result in the squeez-
ing or compression of fingers or other body parts between
moving mechanisms.

Rockwell Automation MagneMotion MagneMover LITE Specifications

General

Brand	Rockwell Automation
Model	MagneMotion MagneMover LITE
Category	Accessories
Language	English