Machine mode of operation | Program run submode
4
152
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Entering compensation values during program run
Tool compensation
Entering tool compensation:
Press the Tool/Add. correct. soft key
Press the Tool correct. soft key
Enter the tool number or select a tool from the
tool list
Enter the compensation values
Press the Save soft key
The valid compensation values are displayed in
the input window and adopted
Entered values are added to the existing
compensation values and are immediately
effective in the display. The control moves in the
compensation direction by the compensation value in
the following traverse block
To delete a compensation, enter the current
compensation value with the opposite algebraic sign
To Next Page
Loading...
Need help?
General
