Organization mode of operation | Service pack
9
676
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Installing a service pack
The control is shut down during the installation of the service pack.
So end any NC program editing, etc. before you begin installation.
NOTICE
Caution: Data may be lost!
The control does not back up the data automatically before
installing a service pack. Power failures or other problems
may interfere with the installation of a service pack. As a
consequence, data may be irreversibly damaged or deleted.
Save the data through a backup before installing the service
pack
Installing a service pack:
Connect a USB stick
Switch to the Organization mode of operation
Press the Key soft key
Enter the code number 231019
Press the UPDATE DATA soft key (if the soft key
is not shown, switch the soft-key menu)
Press the LOAD soft key
Press the PATH soft key to select the directory in
the left window
Press the FILES soft key to select the file in the
right window
Place the cursor on the setup.zip file
Press the SELECT soft key
The control checks whether the service pack can
be used for the current software version of the
control
Confirm the Do you really want to switch off?
prompt
The update program starts
Select the desired language (English or German)
Run the update
The control restarts automatically after the update has
been completed.
To Next Page
Loading...
Need help?
General
