Graphic simulation | Simulation submode
7
530
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
7.1 Simulation submode
Soft key Meaning
Press this soft key to call the Simulation
submode
The Simulation submode can be called from the following
operating modes:
smart.Turn mode of operation
Program run submode
Teach-in submode
Machine mode of operation (MDI cycles)
When called from the smart.Turn mode of operation, the
Simulation submode opens the large simulation window and loads
the selected program. When you call the Simulation submode
from the Machine modes of operation, either the small simulation
window or the last window you used is opened.
To Next Page
Loading...
Need help?
General
