ICP programming | Editing ICP contours
6
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
441
Manipulating contour elements
The control provides various ways to change an existing contour.
The procedure is illustrated in the following example of editing
the length of an element. The other functions work similar to the
procedure described here.
The Manipulate menu provides the following functions for editing
existing contour elements:
Trimming
Length element
Contour length (only for closed contours)
Radius
Diameter
Modify
Contour element
Form element
Delete
Element/range
Move element/range as well
Contour/pocket/Figure/pattern
Form element
All form elements
Transform
Shift a contour
Turning a contour
Mirroring a contour: You can define the position of the
mirror axis by entering the starting point and end point or the
starting point and angle
To Next Page
Loading...
Need help?
General
