Machine mode of operation | Switch-on / Switch-off
4
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
95
Switch-off
Refer to your machine manual.
Switch-on and restart can vary depending on the
machine tool.
To prevent data from being lost at switch-off, you need to shut
down the operating system of the control as follows:
Select the Machine operating mode
If an error message is pending:
Activate the error window
Press the MORE FUNCTIONS soft key
Press the OFF soft key
Confirm with the SHUT DOWN soft key
The control shuts down.
NOTICE
Caution: Data may be lost!
The control must be shut down so that running processes can be
concluded and data can be saved. Immediate switch-off of the
control by turning off the main switch can lead to data loss not
matter what state the control was in!
Always shut down the control
Only operate the main switch after being prompted on the
screen
Restarting the control
Proceed as follows to force a restart:
Select the Machine operating mode
Press the OFF soft key
Press the RESTART soft key
The control restarts.
To Next Page
Loading...
Need help?
General
