To Next Page

To Previous Page

MFP OPTIONS: B064 SERIES

B064 Series/B140 Series/G126 1-92 SM

UP Mode Settings for IEEE 1394

Enter the UP mode and follow the procedure below to perform the initial interface

settings for IEEE 1394. These settings take effect every time the machine is

powered on.

1. Press User Tools/Counter.

2. On the touch panel, press System Settings.

3. Press Interface Settings.

4. Press the key and enter the following settings:

• IP Address

• Subnet Mask

• IP Over 1394. Enable or disable this setting as required. This setting enables

IP Over 1394 as the default setting for the printing method.

• SCSI Print. Enable or disable this setting as required. This setting enables

SCSI Print as the default setting for the printing method.

• SCSI Print Bi-directional. Switch bi-directional printing on or off for SCSI print.

Network Parallel Interface

IEEE 1394 IEEE 802.1b

IP Address

Subnet Mask

IP Over 1394

SCSI Print

0000.0000.0000.0000

Enabled

SCSI Print Bi-directional

Select the desired settings.

System Intialization Settings

End

B064I998.WMF

Ricoh 4051 Service Manual

Other manuals for Ricoh 4051