Ricoh 4051 Service Manual

MFP OPTIONS: B064 SERIES
B064 Series/B140 Series/G126 1-98 SM
SP Mode Settings for 802.11b Wireless LAN
The following SP commands can be set for 802.11b
1. Press Clear Modes 
2. On the operation panel keypad, press .
3. Hold down Clear/Stop  for more than 3 seconds.
4. Press “Copy SP” on the touch-panel to open the SP command selection
screen.
5. Enter .
SP No. Name Function
5840-004 SSID Used to confirm the current SSID setting.
5840-006 Channel MAX Sets the maximum range of the channel settings for the
country.
5840-007 Channel MIN Sets the minimum range of the channels settings allowed
for your country.
5840-010 WEP Key Used to confirm the current WEP key setting.
5840-011 WEP Key Select Used to select the WEP key (Default: 00).
5840-020 WEP Mode Used to display the maximum length of the string that can
be used for the WEP Key entry.
Exit
SP Mode (Service)
Close All Copy Window SP DirectOpen All
X-XXX-XXX
SP2XXX
SP3XXX
SP5XXX
SP6XXX
SP7XXX
SP8XXX
SP4XXX
SP1XXX
Group
Page
Line
Page
Line
Group
21
COPY: SP1-001-001
Initial 0
Prev Page Next Page
14APR 2002 03:25
Feed
Drum
Process
Data Log2
Scanner
Mode
Periphs
Data Log
B064I999.WMF

Ricoh 4051 Specifications

General

Brand	Ricoh
Model	4051
Category	All in One Printer
Language	English