RESETS
B064 Series/B140 Series/G126 5-6 SM
5.2 RESETS
5.2.1 MEMORY ALL CLEAR: SP5801
Before shipping, the SP mode data settings are printed in an SMC Report and
attached to the exposure glass of the machine for your reference. Store this report
in a safe place (next to the toner collection bottle, for example). It is a list of all the
SP initial settings. Refer to this list if you need to initialize one or more SPs. The
initial SP settings are also written in the SP mode tables at the end of this section.
As a rule, you should always print an SMC Report before initializing or adjusting
the SP settings. The SMC Report provides a concise list of all the SP commands
and their current settings. The report can be used for reference if the service
manual is not available.
Executing Memory All Clear resets all the settings stored in the NVRAM to their
default settings except the following:
SP7003-001 (B064)
SP8381 (B140)
Electrical total counter value
SP5811-001: Machine serial number
SP5907: Plug & Play Brand Name and Production Name Setting
1. Execute SP5990 to print out all SMC Data Lists.
2. Open SP mode 5801.
3. Press the number for the item that you want to initialize. The number you select
determines which application is initialized. For example, press 1 if you want to
initialize all modules.
B064 Series
No. What It Initializes Comments
1 All modules Initializes items 2 ~ 15 below.
2 Engine Initializes all registration settings for the engine and copy process
settings.
3 SCS (System Control
Service)
/SRM
Initializes default system settings, SCS settings, operation display
coordinates, and ROM update information.
4 IMH Initializes the image file system.
5 MCS (Memory Control
Service)
Initializes the automatic delete time setting for stored documents.
6 Copier application Initializes all copier application settings.
7 Fax application Not used.
8 Printer application Initializes the printer defaults, programs registered, the printer SP bit
switches, and the printer CSS counter.
9 Scanner application Initializes the defaults for the scanner and all the scanner SP modes.
10 Network application Deletes the Netfile (NFA) management files and thumbnails, and
initializes the Job login ID.
Netfiles: Jobs to be printed from the document server using a PC and
the DeskTopBinder software
11 NCS (Network Control
Service)
Initializes the system defaults and interface settings (IP addresses
also), the SmartNetMonitor for Admin settings, WebStatusMonitor
settings, and the TELNET settings.
14 DCS Initializes the DCS (Delivery & Receive Control Service) settings.
15 UCS Initializes the UCS (User Directory Control Service) settings.
To Next Page
Loading...
Need help?
General
