0B-3 Maintenance and Lubrication:
Lubrication Points
B947H10205002
Proper lubrication is important for smooth operation and long life of each working part of the motorcycle.
Major lubrication points are indicated as follows.
NOTE
• Before lubricating each part, clean off any rusty spots and wipe off any grease, oil, dirt or grime.
• Lubricate exposed parts which are subject to rust, with a rust preventative spray whenever the
motorcycle has been operated under wet or rainy conditions.
Repair Instructions
Air Cleaner Element Replacement
B947H10206001
Replace air cleaner element
Every 18 000 km (11 000 miles, 36 months)
Refer to “Air Cleaner Element Removal and Installation”
in Section 1D (Page 1D-6).
Air Cleaner Element Inspection
B947H10206002
Inspect air cleaner element
Every 6 000 km (4 000 miles, 12 months)
Inspection
1) Remove the air cleaner element. Refer to “Air
Cleaner Element Removal and Installation” in
Section 1D (Page 1D-6).
2) Inspect the air cleaner element for clogging. If it is
clogged with dirt, replace it with a new one.
CAUTION
!
Do not blow the air cleaner element with
compressed air.
NOTE
If driving under dusty conditions, replace the
air cleaner element more frequently. Make
sure that the air cleaner is in good condition
at all times. The life of the engine depends
largely on this component.
5
6
1
2
3
4
I947H1020033-02
1. Clutch lever holder 5. Brake lever holder
2. Side stand pivot and spring hook 6. Brake pedal pivot and footrest pivot
3. Gearshift lever pivot and footrest pivot : Apply grease.
4. Drive chain : Apply oil.
I947H1020001-01
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
