1H-13 Ignition System:
Specifications
Service Data
B947H11807001
Electrical
Unit: mm (in)
Tightening Torque Specifications
B947H11807002
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List” in Section 0C
(Page 0C-9).
Item Specification Note
Firing order 1 ⋅ 2 ⋅ 4 ⋅ 3
Spark plug
Type
NGK: CR9EIA-9
DENSO: IU27D
Gap 0.8 – 0.9 (0.031 – 0.035)
Spark performance Over 8 (0.3) at 1 atm.
CKP sensor resistance 142 – 194 Ω
CKP sensor peak voltage 0.5 V and more When cranking
Ignition coil resistance
Primary 1.1 – 1.9 Ω
Terminal –
Terminal
Secondary 6.4 – 9.6 kΩ
Plug cap –
Terminal
Ignition coil primary peak voltage 80 V and more When cranking
Fastening part
Tightening torque
Note
N⋅m kgf-m lbf-ft
Spark plug 11 1.1 8.0 )(Page 1H-6)
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
