2B-11 Front Suspension:
Specifications
Service Data
B947H12207001
Suspension
Unit: mm (in)
Tightening Torque Specifications
B947H12207002
NOTE
The specified tightening torque is described in the following.
“Front Fork Components” (Page 2B-1)
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List” in Section 0C
(Page 0C-9).
Item Standard Limit
Front fork stroke 125 (4.9) —
Front fork spring free length 241 (9.49) 236 (9.29)
Front fork oil level (Without spring,
outer tube fully compressed)
75 (2.95)
70 (2.76) 10 min. after adjustment
—
Front fork oil type SUZUKI FORK OIL SS-05 or an equivalent fork oil —
Front fork oil capacity (Each leg) 476 ml (16.1/16.8 US/lmp oz) —
Front fork inner tube O.D 43 (1.7) —
Front fork spring adjuster 4 turns in from softest position —
Front fork damping force adjuster
Rebound 4 turns out from stiffest position —
Compression 5 turns from stiffest position —
Fastening part
Tightening torque
Note
N⋅m kgf-m lbf-ft
Front fork cap
35 3.5 25.5
)(Page 2B-3) /
)(Page 2B-9)
Front fork lower clamp bolt 23 2.3 16.5 )(Page 2B-3)
Front fork upper clamp bolt 23 2.3 16.5 )(Page 2B-3)
Handlebar clamp bolt 23 2.3 16.5 )(Page 2B-3)
Piston rod nut 28 2.8 20.0 )(Page 2B-8)
Rod guide case 90 9.0 65.0 )(Page 2B-9)
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
