4C-2 Rear Brakes:
Rear Brake Pad Inspection
B947H14306002
The extent of brake pads wear can be checked by
observing the grooved limit line “A” on the pads. When
the wear exceeds the grooved limit line, replace the
pads with new ones. Refer to “Rear Brake Pad
Replacement” (Page 4C-2).
CAUTION
!
Replace the brake pad as a set, otherwise
braking performance will be adversely
affected.
Rear Brake Pad Replacement
B947H14306003
1) Remove the plug (1) and brake pad mounting pin (2).
2) Remove the brake pads (3).
CAUTION
!
Do not operate the brake pedal while the
pads are removed.
3) Clean up the caliper, especially around the caliper
piston.
CAUTION
!
Replace the brake pads as a set, otherwise
braking performance will be adversely
affected.
4) Install new brake pads.
NOTE
Make sure that the detent of the pads is
seated onto the retainers on the caliper
bracket.
“A”
I947H1430027-01
1
2
I947H1430001-02
3
I947H1430002-02
I947H1430003-01
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
