5B-22 Manual Transmission:
Tightening Torque Specifications
B947H15207002
NOTE
The specified tightening torque is described in the following.
“Transmission Components” (Page 5B-2)
“Gearshift Lever Construction” (Page 5B-15)
“Gearshift Shaft / Gearshift Cam Plate Components” (Page 5B-16)
“Gearshift Shaft Construction” (Page 5B-17)
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List” in Section 0C
(Page 0C-9).
Special Tools and Equipment
Recommended Service Material
B947H15208001
NOTE
Required service material is also described in the following.
“Transmission Components” (Page 5B-2)
“Gearshift Lever Construction” (Page 5B-15)
“Gearshift Shaft / Gearshift Cam Plate Components” (Page 5B-16)
“Gearshift Shaft Construction” (Page 5B-17)
Fastening part
Tightening torque
Note
N⋅m kgf-m lbf-ft
Driveshaft right bearing case bolt 12 1.2 8.7 )(Page 5B-6)
Driveshaft left bearing case bolt 12 1.2 8.7 )(Page 5B-7)
Driveshaft oil seal retainer screw 12 1.2 8.7 )(Page 5B-7)
Gearshift cam bearing retainer screw 10 1.0 7.0 )(Page 5B-8)
Gear position switch mounting bolt 6.5 0.65 4.5 )(Page 5B-14)
Gearshift arm stopper 19 1.9 13.5 )(Page 5B-18)
Gearshift cam stopper bolt 10 1.0 7.0 )(Page 5B-18)
Gearshift cam plate bolt 13 1.3 9.5 )(Page 5B-19)
Gearshift shaft end screw 8.5 0.85 6.0 )(Page 5B-19)
Material SUZUKI recommended product or Specification Note
Grease SUZUKI SUPER GREASE “A” or
equivalent
P/No.: 99000–25010 )(Page 5B-6) / )(Page 5B-
7) / )(Page 5B-7) /
)(Page 5B-7) / )(Page 5B-
11) / )(Page 5B-14) /
)(Page 5B-21)
Thread lock cement THREAD LOCK CEMENT SUPER
“1303” or equivalent
P/No.: 99000–32030 )(Page 5B-18)
THREAD LOCK CEMENT SUPER
“1322” or equivalent
P/No.: 99000–32110 )(Page 5B-6) / )(Page 5B-
7) / )(Page 5B-7) /
)(Page 5B-8) / )(Page 5B-
19) / )(Page 5B-19)
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
