Suzuki GSX-R1000 User Manual

Engine Mechanical: 1D-79
2) Check the corresponding crank pin O.D. code
numbers ([1], [2] or [3]) “B”.
3) Measure the conrod crank pin O.D. with the special
tool. If any of the measurements are out of
specification, replace the crankshaft.
Crank pin O.D. specification
Special tool
(A): 09900–20202 (Micrometer (25 – 50
mm))
4) Select the specified bearings from the bearing
selection table.
CAUTION
!
The bearings should be replaced as a set.
Bearing selection table
Bearing thickness specification
Crankshaft Journal Bearing Inspection and
Selection
B947H11406043
Refer to “Engine Bottom Side Disassembly” (Page 1D-
49).
Refer to “Engine Bottom Side Assembly” (Page 1D-56).
Inspection
1) Inspect each upper and lower crankcase bearing for
any damage.
Code “B” O.D. specification
1
34.992 – 35.000 mm
(1.3776 – 1.3780 in)
2
34.984 – 34.992 mm
(1.3773 – 1.3776 in)
3
34.976 – 34.984 mm
(1.3770 – 1.3773 in)
“B”
I947H1140236-01
(A)
I823H1140286-01
Conrod
I.D. “A”
”
Code
1
2
1
Green
Black
2
Black
Brown
3
Brown
Yellow
Crank pin O.D. “B
I718H1140293-01
Color “C” (Part No.) Thickness
Yellow
(12164-47H00-0D0)
1.488 – 1.492 mm
(0.0586 – 0.0587 in)
Brown
(12164-47H00-0C0)
1.484 – 1.488 mm
(0.0584 – 0.0586 in)
Black
(12164-47H00-0B0)
1.480 – 1.484 mm
(0.0583 – 0.0584 in)
Green
(12164-47H00-0A0)
1.476 – 1.480 mm
(0.0581 – 0.0583 in)
“C”: Color code
“C”
I823H1140595-01
I947H1140237-01
I947H1140238-01
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk

Suzuki GSX-R1000 Specifications

General

Brand	Suzuki
Model	GSX-R1000
Category	Motorcycle
Language	English