Maintenance and Lubrication: 0B-4
3) Drain water from the air cleaner box by removing the
drain plug (1).
4) Reinstall the removed parts.
Exhaust Pipe Bolt and Muffler Bolt Inspection
B947H10206003
Tighten exhaust pipe bolts and muffler bolts
Initially at 1 000 km (600 miles, 2 months) and every
12 000 km (7 500 miles, 24 months) thereafter
Check the exhaust pipe bolts and muffler bolts to the
specified torque.
Tightening torque
Exhaust pipe bolt (a): 23 N·m (2.3 kgf-m, 16.5 lbf-ft)
Muffler chamber connecting bolt (b): 30 N·m (3.0
kgf-m, 21.5 lbf-ft)
Muffler chamber bracket bolt (c): 25 N·m (2.5 kgf-m,
18.0 lbf-ft)
Muffler chamber mounting bolt (d): 23 N·m (2.3 kgf-
m, 16.5 lbf-ft)
Muffler connecting bolt (e): 23 N·m (2.3 kgf-m, 16.5
lbf-ft)
Muffler mounting bolt (f): 25 N·m (2.5 kgf-m, 18.0
lbf-ft)
Exhaust Control Valve Inspection
B947H10206004
Inspect exhaust control valve
Initially at 1 000 km (600 miles, 2 months) and every
12 000 km (7 500 miles, 24 months) thereafter
Inspect exhaust control valve as follows:
1) Remove the left side cowling. Refer to “Exterior
Parts Removal and Installation” in Section 9D
(Page 9D-6).
2) Check the exhaust control valve actuator (1) for its
smooth movement when the ignition switch is turned
on. If the exhaust valve actuator does not move
smoothly, check exhaust valve actuator electrical
circuit. Refer to “EXCVA Inspection” in Section 1K
(Page 1K-9).
3) Check the lock-nuts (2) for tightness. If the lock-nuts
(2) are loose, tighten them after adjusting the cable
length. Refer to “EXCV Cable Removal and
Installation” in Section 1K (Page 1K-6).
1
I947H1020002-01
FWD
(f)
(e)
(e)
(d)
(c)
(b)
(a)
I947H1020053-01
1
I947H1020003-02
2
I947H1020004-01
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
