Fuel System: 1G-9
Fuel Tank Removal and Installation
B947H11706008
Removal
WARNING
!
• Keep away from fire or spark.
• Spilled gasoline should be wiped off
immediately.
• Work in a well-ventilated area.
1) Remove the front seat. Refer to “Exterior Parts
Removal and Installation” in Section 9D (Page 9D-
6).
2) Take out the fuel tank prop stay (1).
3) Remove the bolts.
4) Lift and support the fuel tank with the prop stay.
5) Disconnect the fuel pump lead wire coupler (2).
6) Place a rag under the fuel feed hose (3) and
disconnect the fuel feed hose from the fuel tank.
CAUTION
!
When removing the fuel tank, do not leave
the fuel feed hose on the fuel pump side.
7) Disconnect the fuel tank drain hose (4).
8) Disconnect the surge hose (5). (For E-33)
9) Disconnect the fuel tank breather hose. (Except for
E-33)
10) Remove the fuel tank by removing its bracket bolt
(6).
Installation
Install the fuel tank in the reverse order of removal.
Pay attention to the following point:
NOTE
Connect the fuel feed hose to the fuel pump
until it locks securely (a click is heard).
1
I947H1170026-01
I947H1170003-02
I947H1170027-01
2
3
5
4
I947H1170028-01
6
I947H1170029-01
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
