4A-18 Brake Control System and Diagnosis:
Rear Brake Pedal Construction
B947H14106019
Rear Brake Pedal Removal and Installation
B947H14106020
Removal
1) Remove the master cylinder assembly. Refer to
“Rear Brake Master Cylinder Assembly Removal
and Installation” (Page 4A-15).
2) Disconnect the rear brake light switch lead wire
coupler. Refer to “Rear Brake Light Switch
Inspection” (Page 4A-4).
3) Remove the rear brake pedal as shown in the rear
brake pedal construction. Refer to “Rear Brake
Pedal Construction” (Page 4A-18).
Installation
CAUTION
!
Replace the snap ring with a new one.
Install the rear brake pedal as shown in the rear brake
pedal construction. Refer to “Rear Brake Pedal
Construction” (Page 4A-18).
FWD
1
2
3
5
4
(a)
(b)
(c)
I947H1410056-02
1. Footrest bracket No. 2 5. Footrest : Apply grease.
2. Footrest bracket No. 1 : 35 N⋅m (3.5 kgf-m, 25.5 lbf-ft) : Apply thread lock to the thread part.
3. Rear brake pedal : 23 N⋅m (2.3 kgf-m, 16.5 lbf-ft) : Do not reuse.
4. Footrest holder : 18 N⋅m (1.8 kgf-m, 13.0 lbf-ft)
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
