Manual Transmission: 5B-15
Gearshift Lever Construction
B947H15206009
Gearshift Lever Removal and Installation
B947H15206010
Removal
Remove the gearshift lever as shown in the gearshift
lever construction. Refer to “Gearshift Lever
Construction” (Page 5B-15).
Installation
1) Install the gearshift lever as shown in the gearshift
lever construction. Refer to “Gearshift Lever
Construction” (Page 5B-15).
2) After installing the gearshift lever, check the gearshift
lever height. Refer to “Gearshift Lever Height
Inspection and Adjustment” (Page 5B-16).
“a”
1
(a)
(b)
2
3
4
5
“A”
I947H1520058-02
1. Gearshift lever bracket 4. Snap ring “a”: 65 – 75 mm (2.6 – 3.0 in) : Apply grease.
2. Gearshift lever shaft 5. Gearshift lever : 28 N⋅m (2.8 kgf-m, 20.0 lbf-ft) : Do not reuse.
3. Washer “A”: Footrest top surface : 40 N⋅m (4.0 kgf-m, 29.0 lbf-ft)
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
