Engine Cooling System: 1F-6
4) Remove the radiator mounting bolts.
5) Move the radiator forward.
6) Apply compressed air from the engine side.
7) Tighten the upper radiator mounting bolts.
8) Apply thread lock to the radiator bracket bolts and
tighten all bolts securely.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER “1322” or
equivalent)
9) Apply thread lock to the oil cooler bolts and tighten
them securely.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER “1322” or
equivalent)
10) Reinstall the removed parts.
Radiator / Cooling Fan Motor Removal and
Installation
B947H11606004
Removal
1) Remove the inner under cowlings. Refer to “Exterior
Parts Removal and Installation” in Section 9D
(Page 9D-6).
2) Drain engine coolant. Refer to “Cooling System
Inspection” in Section 0B (Page 0B-12).
3) Disconnect the reservoir tank inlet hose (1) and
water air bleed hose (2).
4) Remove the radiator reservoir tank (3).
5) Disconnect the radiator inlet hose (4).
6) Disconnect the cooling fan motor coupler (5).
I947H1160007-01
I947H1160008-02
I947H1160051-01
I947H1160056-01
I947H1160057-01
1
2
3
I947H1160004-02
5
4
I947H1160009-02
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
