9B-8 Lighting Systems:
Installation
Install the license plate light in the reverse order of
removal. Pay attention to the following point:
• Tighten the license plate light mounting nuts (1) to the
specified torque.
Tightening torque
License plate light mounting nut (a): 5 N·m (0.5
kgf-m, 3.5 lbf-ft)
License Plate Light Bulb Replacement
B947H19206013
CAUTION
!
When you touch the bulb with your bare
hands, clean the bulb with a cloth moistened
with alcohol or soap water to prevent
premature bulb failure.
1) Remove the license plate light mounting nuts.
2) Remove the lens cover (1) by removing the screws.
3) Replace the bulb (2) with a new one.
4) Reinstall the removed parts.
5) Tighten the license plate light mounting nuts (3) to
the specified torque.
Tightening torque
License plate light mounting nut (a): 5 N·m (0.5
kgf-m, 3.5 lbf-ft)
(a)
1
I947H1920025-01
I947H1920026-01
1
I947H1920027-01
2
I947H1920028-01
(a)
3
I947H1920029-01
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
