Wheels and Tires: 2D-4
Front Wheel Assembly Removal and Installation
B947H12406003
Removal
1) Remove the brake calipers, left and right.
CAUTION
!
Do not operate the brake lever with the
caliper removed.
2) Loosen two axle pinch bolts (1) on the right front fork
leg.
3) Remove the front axle bolt (2).
4) Raise the front wheel off the ground and support the
motorcycle with a jack or a wooden block.
CAUTION
!
Do not carry out the work with the
motorcycle resting on the side-stand. Do not
support the motorcycle with the exhaust
pipes. Make sure that the motorcycle is
supported securely.
5) Loosen two axle pinch bolts (3) on the left front fork
leg.
6) Draw out the front axle (4) and remove the front
wheel.
7) Remove the collar (5) (RH only).
NOTE
After removing the front wheel, fit the
calipers temporarily to the original positions.
Installation
1) Install the collar (1) to the right side of the wheel.
WARNING
!
The directional arrow on the tire should point
to the wheel rotation.
I947H1240001-01
1
2
I947H1240002-01
5
3
4
I947H1240003-01
1
I947H1240004-01
I947H1240005-01
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
