1F-19 Engine Cooling System:
Tightening Torque Specifications
B947H11607002
NOTE
The specified tightening torque is described in the following.
“Water Hose Routing Diagram” (Page 1F-3)
“Water Pump Components” (Page 1F-12)
“Water Pump Construction” (Page 1F-13)
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List” in Section 0C
(Page 0C-9).
Special Tools and Equipment
Recommended Service Material
B947H11608001
NOTE
Required service material is also described in the following.
“Water Hose Routing Diagram” (Page 1F-3)
“Water Pump Components” (Page 1F-12)
“Water Pump Construction” (Page 1F-13)
Special Tool
B947H11608002
Fastening part
Tightening torque
Note
N⋅m kgf-m lbf-ft
Thermostat cover bolt 10 1.0 7.0 )(Page 1F-10)
Water pump mounting bolt 10 1.0 7.0 )(Page 1F-14)
Impeller securing bolt 8 0.8 6.0 )(Page 1F-17)
Water pump case screw 6 0.6 4.5 )(Page 1F-17)
Water pump air bleeder bolt 13 1.3 9.5 )(Page 1F-17)
Material SUZUKI recommended product or Specification Note
Grease SUZUKI SUPER GREASE “A” or
equivalent
P/No.: 99000–25010 )(Page 1F-13) /
)(Page 1F-16)
Molybdenum oil MOLYBDENUM OIL SOLUTION — )(Page 1F-16)
Thread lock cement THREAD LOCK CEMENT SUPER
“1322” or equivalent
P/No.: 99000–32110 )(Page 1F-6) / )(Page 1F-
6) / )(Page 1F-7)
09900–25008 09913–70210
Multi circuit tester set Bearing installing set (10 –
75 Φ)
)(Page 1F-10) )(Page 1F-15)
09921–20240
Bearing remover set
)(Page 1F-15)
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
