Front Brakes: 4B-5
• When installing the spring to the caliper, bring its
wider pawl “A” facing top side.
• Install the brake pads and temporarily tighten the pad
mounting pins (3).
Front Brake Caliper Parts Inspection
B947H14206006
Refer to “Front Brake Caliper Disassembly and
Assembly” (Page 4B-3).
Brake Caliper Cylinder
Inspect the brake caliper cylinder wall for nicks,
scratches or other damage. If any damage is found,
replace the caliper with a new one.
Brake Caliper Piston
Inspect the surface of brake caliper pistons for any
scratches or other damage. If any damage is found,
replace the pistons with a new set.
Brake Pad Mounting Pin
Inspect the brake pad mounting pins for wear and other
damage. If any damage is found, replace the mounting
pins with new ones.
Brake Pad Spring
Inspect the brake pad spring for damage and excessive
bend. If any damage is found, replace it with a new one.
“A”: Wider pawl “B”: Top side
“A”
“B”
I947H1420009-01
3
I947H1420010-01
I947H1420011-01
I947H1420012-01
I947H1420013-01
I947H1420014-01
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
