Fuel System: 1G-3
Schematic and Routing Diagram
Fuel Tank Drain Hose and Breather Hose Routing Diagram
B947H11702001
1
2
2
3
5
6
“C”
“D”
“E”
“F”
4
“A”
“B”
“G”
“a”
“b”
“c”
“H”
“I”
I947H1170020-02
1. Fuel tank water drain hose “A”: White marking “G”: Stick the hose clamp along the line behind the cowling.
2. Fuel tank breather hose No. 1 “B”: Set the hose end to the root of tank nipple. “H”: Clamp the hoses at marking point. Match the length of
hoses.
3. Fuel tank breather hose No. 2 “C”: Match the direction of 3-way joint and hoses. “I”: Pass the hoses in front of the rear brake reservoir.
4. Fuel tank breather hose No. 3 “D”: Arrange the hoses in parallel. “a”: 30 – 45°
5. 3-way joint “E”: Face the clamp end forward. Cut off the
excess tip of the clamp.
“b”: 10 – 30 mm (0.4 – 1.2 in)
6. Frame “F”: Set the hoses with the white marking inside. “c”: 50 mm (2.0 in)
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
