Rear Suspension: 2C-2
Rear Suspension Assembly Construction
B947H12306002
1
1
(a)
(c)
(a)
2
(b)
4
(f)
8
(g)
9
(d)
6
(b)
3
2
3
5
6
4
“a”
“c”“c”
“a”
“a”“a”
“a”“a”
(b)
5
“b”“b”
(e)
7
(e)
7
I947H1230002-04
1. Rear shock absorber mounting bolt (Upper) 8. Swingarm pivot shaft : 115 N⋅m (11.5 kgf-m, 83.0 lbf-ft)
2. Rear shock absorber mounting nut (Lower) 9. Swingarm pivot lock-nut : 100 N⋅m (10.0 kgf-m, 72.5 lbf-ft)
3. Cushion rod mounting nut (Front) “a”: 0.5 mm (0.02 in) : 65 N⋅m (6.5 kgf-m, 47.0 lbf-ft)
4. Cushion rod mounting nut (Rear) “b”: 1.5 mm (0.06 in) : 15 N⋅m (1.5 kgf-m, 11.0 lbf-ft)
5. Cushion lever mounting nut “c”: 0 – 0.5 mm (0 – 0.02 in) : 90 N⋅m (9.0 kgf-m, 65.0 lbf-ft)
6. Swingarm pivot nut : 50 N⋅m (5.0 kgf-m, 36.0 lbf-ft) : Apply grease to the bearing.
7. Swingarm pivot boss nut : 98 N⋅m (9.8 kgf-m, 71.0 lbf-ft)
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
