Exhaust System: 1K-14
Specifications
Service Data
B947H11B07001
FI Sensors
Tightening Torque Specifications
B947H11B07002
NOTE
The specified tightening torque is described in the following.
“Exhaust Control System Construction” (Page 1K-4)
“Exhaust System Components” (Page 1K-5)
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List” in Section 0C
(Page 0C-9).
Item Standard/Specification Note
HO2 sensor output voltage
0.3 V and less at idle speed
0.6 V and more at 5 000 r/min
EXCVA position sensor input
voltage
4.5 – 5.5 V
EXCVA position sensor output
voltage
Closed 0.45 – 1.4 V
Opened 3.6 – 4.55 V
EXCVA position sensor resistance Approx. 3.1 kΩ
At adjustment
position
Fastening part
Tightening torque
Note
N⋅m kgf-m lbf-ft
EXCVA pulley mounting bolt 5 0.5 3.5 )(Page 1K-9)
HO2 sensor 25 2.5 18.0 )(Page 1K-13)
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
