9C-1 Combination Meter / Fuel Meter / Horn:
Body and Accessories
Combination Meter / Fuel Meter / Horn
General Description
Combination Meter System Description
B947H19301001
This combination meter mainly consists of a stepping motor, LCD (Liquid Crystal Display) and LEDs (Light Emitting
Diode).
The tachometer pointer is driven by the stepping motor.
The LCDs indicate followings:
Speed, Odo / Trip 1 / Trip 2 / Fuel reserve trip / Clock / FI (DTC) / Lap time counter / Panel light brightness, Gear
position, Engine RPM indicator, Oil pressure indicator, Engine coolant temperature and Drive mode position.
LED (Light Emitting Diode)
LED is used for the illumination light and each indicator light.
LED is maintenance free. LED is less power consuming and more resistant to vibration resistance compared to the
bulb.
Engine RPM Indicator Light
This speedometer is equipped the engine revolution indicator light. The engine revolution indicator light is adjustable
from 5 000 – 13 750 r/min. (from 5 000 r/min to 10 000 r/min, every 250 r/min and 10 000 r/min to 13 750 r/min, every
50 r/min: Initial setting: 11 000 r/min)
1
2
3
5
6
8
9
10
12
12
13
14
15
16
17
18
4
7
11
I947H1930001-02
1. ADJ button 10. LED (Oil pressure indicator light / Engine coolant temperature indicator light)
2. Tachometer 11. LCD (Oil pressure indicator / Engine coolant temperature indicator)
3. LCD (Speedometer) 12. LED (Turn signal indicator light)
4. LCD (Engine RPM indicator) 13. LED (Neutral indicator light)
5. SEL button 14. LED (Fuel indicator light)
6. LCD (Odo / Trip 1 / Trip 2 / Fuel reserve trip / Clock /
FI (DTC) / Lap time counter / Panel light brightness)
15. LED (Immobilizer indicator light) (For E-02, 19, 24, 51)
7. LED (Engine RPM indicator light) 16. LED (High-beam indicator light)
8. LCD (Engine coolant temperature) 17. LCD (Gear position indicator)
9. LCD (Drive mode indicator) 18. LED (FI / Sd)
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk