Brake Control System and Diagnosis: 4A-19
Specifications
Service Data
B947H14107001
Brake
Unit: mm (in)
Tightening Torque Specifications
B947H14107002
NOTE
The specified tightening torque is described in the following.
“Front Brake Hose Routing Diagram” (Page 4A-1)
“Rear Brake Hose Routing Diagram” (Page 4A-2)
“Front Brake Master Cylinder Components” (Page 4A-9)
“Rear Brake Master Cylinder Components” (Page 4A-14)
“Rear Brake Pedal Construction” (Page 4A-18)
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List” in Section 0C
(Page 0C-9).
Item Standard Limit
Rear brake pedal height 65 – 75 (2.6 – 3.0) —
Master cylinder bore
Front 17.460 – 17.503 (0.6874 – 0.6891) —
Rear 14.000 – 14.043 (0.5512 – 0.5529) —
Master cylinder piston diam.
Front 17.417 – 17.444 (0.6857 – 0.6868) —
Rear 13.957 – 13.984 (0.5495 – 0.5506) —
Brake fluid type DOT 4 —
Fastening part
Tightening torque
Note
N⋅m kgf-m lbf-ft
Air bleeder valve (Front caliper)
7.5 0.75 5.5
)(Page 4A-5) /
)(Page 4A-7)
Air bleeder valve (Rear caliper)
6 0.6 4.5
)(Page 4A-6) /
)(Page 4A-8)
Front brake master cylinder holder bolt (Upper
and Lower)
10 1.0 7.0
)(Page 4A-10)
Brake hose union bolt
23 2.3 16.5
)(Page 4A-11) /
)(Page 4A-15)
Air bleeder valve (Front master cylinder) 6 0.6 4.5 )(Page 4A-11)
Brake lever pivot bolt 1 0.1 0.5 )(Page 4A-13)
Brake lever pivot bolt lock-nut 6 0.6 4.5 )(Page 4A-13)
Rear brake master cylinder mounting bolt 10 1.0 7.0 )(Page 4A-15)
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
