Brake Control System and Diagnosis: 4A-13
• Apply grease to the push rod.
: Grease 99000–25100 (SUZUKI SILICONE
GREASE or equivalent)
• Apply grease to the brake lever pivot bolt.
: Grease 99000–25100 (SUZUKI SILICONE
GREASE or equivalent)
• Tighten the pivot bolt (1) and lock-nut (2) to the
specified torque.
Tightening torque
Brake lever pivot bolt (a): 1 N·m (0.1 kgf-m, 0.5
lbf-ft)
Brake lever pivot bolt lock-nut (b): 6 N·m (0.6
kgf-m, 4.5 lbf-ft)
• When installing the brake light switch, align the
projection “C” on the switch with the hole “D” in the
master cylinder.
Front Brake Master Cylinder Parts Inspection
B947H14106014
Refer to “Front Brake Master Cylinder / Brake Lever
Disassembly and Assembly” (Page 4A-11).
Master Cylinder
Inspect the master cylinder bore for any scratches or
other damage.
Piston / Rubber Parts
Inspect the piston surface for any scratches or other
damage.
Inspect the primary cup, secondary cup and dust boot
for wear or damage.
I947H1410030-01
I947H1410031-01
(b)
2
(a)
1
I947H1410032-02
“C”
“D”
I947H1410044-03
I947H1410033-01
I837H1410041-01
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
