1G-12 Fuel System:
9) Remove the fuel mesh filter (12).
10) Remove the fuel pump (13).
Assembly
Refer to “Fuel Mesh Filter Inspection and Cleaning”
(Page 1G-13).
Assemble the fuel tank pump in the reverse order of the
disassembly. Pay attention to the following points:
CAUTION
!
• To prevent fuel leakage, the bushing and
O-ring must be replaced with new ones.
• Apply engine oil lightly to the O-rings.
CAUTION
!
Connect all lead wires securely so as not to
cause contact failure.
• Install a new O-ring and apply grease to it.
: Grease 99000–25010 (SUZUKI SUPER
GREASE “A” or equivalent)
WARNING
!
The O-ring must be replaced with a new one
to prevent fuel leakage.
12
13
I947H1170011-01
I947H1170012-01
I947H1170013-01
1. Fuel pump (+) lead wire (Y/R)
2. Fuel level gauge (+) lead wire (R/B)
3. Fuel pump (–) lead wire (B/W)
4. Fuel level gauge (–) lead wire (B/W)
1
2
3
4
I947H1170014-01
2
3
4
I947H1170018-01
I947H1170015-01
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
