1A-28 Engine General Information and Diagnosis:
* : Immobilizer system equipped model only. (E-02, 19, 24, 51)
C91
Vehicle speed sensor
Speedometer does not receive signal from the
vehicle speed sensor for more than 6 sec.
when the motorcycle is running.
ECM does not receive signal from the vehicle
speed sensor for more than 6 sec. when the
motorcycle is running.
Failure in communication between ECM and
speedometer with reference to vehicle speed.
Speed sensor and
speedometer wiring/coupler
connection between ECM and
speedometer
P0500
C93
Steering damper
solenoid valve
Steering damper control current does not flow
to the solenoid valve.
With IG turned ON, ECM detects a failure of
internal circuit element. Solenoid current does
not converge to the target value. Battery
voltage is 10 V or below with the engine
running.
Steering damper solenoid valve
circuit interrupter element
shorted, feedback current
convergence failure, low
battery voltage
P1769
H
Steering damper control current is higher than
specified value.
An abnormal current is detected during the
vehicle standstill. Solenoid current is 0.7 A or
above.
Steering damper solenoid valve
circuit shorted to VCC
L
Steering damper control current is lower than
specified value.
With IG turned ON, ECM detects a
discontinuity. An abnormal current is detected
during the vehicle standstill.
Steering damper solenoid valve
circuit open or shorted
Malfunction
Code
Detected Item Detected Failure Condition Check For
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
Need help?
General
