COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 6 TROUBLESHOOTING
6-35
[2]
[1]
[4]
[3]
[1]
[4]
A
B
[2]
2.4.17 Position of the Side Paper Deck Pickup Roller Releasing Solenoid
Before removing the deck pickup roller releasing solenoid [1], be sure to take note of the
positions of the two fixing screws [2] of the solenoid with reference to the scale on the sup-
port plate. Or, mark the position for the solenoid itself on the support plate using a scriber.
If you are replacing the solenoid on its own, be sure to secure the solenoid exactly where
the old solenoid was found.
F06-204-21
2.4.18 Attaching the Timing Belt for the Manual Feed Tray Assembly Side
Guide
Butt the rack plate [1] of the manual feed tray against A (open state).
Move the slide volume [2] in the direction of B, and attach the timing belt [3] to the pul-
ley [4].
F06-204-22
To Next Page
Loading...
Need help?
General
